Wholesale Stamping Mould Supplier – All series of metal stamping – RAISING-Elec
Wholesale Stamping Mould Supplier – All series of metal stamping – RAISING-Elec Detail:
Common appearance defect types of metal stamping parts:
Crack: the metal material breaks during stamping
Scratch: a strip-shaped shallow groove on the surface of hardware
Scratch: damage caused by contact and friction between material surfaces
Oxidation: the material changes chemically with the oxygen in the air
Deformation: appearance variation caused by material during stamping or transfer
Burr: surplus material is not completely left during punching or corner cutting
Convex Dent: abnormal bulge or depression on the material surface
Die mark: the mark left by the die on the material surface during stamping
Stain: oil stain or dirt attached to its surface during processing
● Wire-EDM : 6 Sets
● Brand: Seibu & Sodick
● Capability: Roughness Ra<0.12 / Tolerance +/-0.001mm
● Profile Grinder: 2 Sets
● Brand: WAIDA
● Capability: Roughness <0.05 / Tolerance +/-0.001
Product detail pictures:
Related Product Guide:
So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for Wholesale Stamping Mould Supplier – All series of metal stamping – RAISING-Elec , The product will supply to all over the world, such as: Armenia, Latvia, New Orleans, We've been consistently broadening the market within Romania in addition to preparation punching in extra premium quality merchandise connected with printer on t shirt so that you can Romania. Most people firmly believe we've the whole capacity to provide you happy solutions.
By Dora from Greenland - 2018.05.13 17:00
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Cherry from Romania - 2017.10.25 15:53