Precision Machined Components Manufacturers – All series of machining manufacture – RAISING-Elec

Material: Cr12 45# steel

Processing equipment: wire cutting, precision lathe processing

Accuracy requirement: 0.01mm   Gear parallelism requirement: 0.02mm

Surface treatment: blackening, high level treatment, vacuum treatment

Machining scope of Raising: 

1. Precision machining.

2. Precision equipment parts processing.

3. Processing of non-standard spare parts.

4. Machining of precision special-shaped parts.

5. Hardware and mechanical parts processing.

6. Surface treatment of various mechanical parts.

Design datum: the datum used to determine the position of other points, lines and planes on the part drawing is called design datum.

Process benchmark: the benchmark used in the processing and assembly of parts is called process benchmark. Process datum can be divided into assembly datum, measurement datum and positioning datum according to different purposes.

(1) Assembly datum: the datum used to determine the position of parts in components or products during assembly, which is called assembly datum.

(2) Measuring datum: the datum used to check the size and position of the machined surface is called measuring datum.

(3) Positioning datum: the datum used for workpiece positioning during machining, which is called positioning datum. As for the surface (or line or point) as the positioning reference, only the raw blank surface can be selected in the first process, which is called coarse reference. In each subsequent process, the machined surface can be used as the positioning reference, which is called fine reference[ 2]

● Wire-EDM : 6 Sets

● Brand: Seibu & Sodick

● Capability:  Roughness Ra<0.12  / Tolerance +/-0.001mm

● Profile Grinder: 2 Sets

● Brand: WAIDA

● Capability: Roughness <0.05 / Tolerance +/-0.001