Precision Components Service – OEM ODM fastener customization service – RAISING-Elec
Precision Components Service – OEM ODM fastener customization service – RAISING-Elec Detail:
Bolt connecting for steel structure is a connection method that connects more than two steel structure parts or components into one by bolts. Bolt connection is the simplest connection method in component pre assembly and structural installation.
Bolted connection is the earliest used in metal structure installation. In the late 1930s, bolt connection was gradually replaced by rivet connection, which was only used as a temporary fixing measure in component assembly. High strength bolt connection method appeared in the 1950s. High strength bolts are made of medium carbon steel or medium carbon alloy steel, and their strength is 2 ~ 3 times higher than that of ordinary bolts. High strength bolt connection has the advantages of convenient construction, safety and reliability. It has been applied in the manufacturing and installation of steel structures in some metallurgical plants since the 1960s.
Bolt specifications commonly used in steel structures include M12, M16, M20, M24 and M30. M is the bolt symbol and the number is the nominal diameter.
Bolts are divided into 10 grades according to performance grades: 3.6, 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 9.8, 10.9 and 12.9. Bolts above grade 8.8 are made of low-carbon alloy steel or medium carbon steel and are generally referred to as high-strength bolts after heat treatment (quenching and tempering), and bolts below grade 8.8 (excluding grade 8.8, refined ordinary bolts also include grade 8.8) are generally referred to as ordinary bolts. The following table shows the performance grade and mechanical properties of bolts.
● Wire-EDM : 6 Sets
● Brand: Seibu & Sodick
● Capability: Roughness Ra<0.12 / Tolerance +/-0.001mm
● Profile Grinder: 2 Sets
● Brand: WAIDA
● Capability: Roughness <0.05 / Tolerance +/-0.001
Product detail pictures:
Related Product Guide:
We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Precision Components Service – OEM ODM fastener customization service – RAISING-Elec , The product will supply to all over the world, such as: Nicaragua, Cyprus, Oslo, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Miguel from Bulgaria - 2017.11.01 17:04
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Eunice from Belgium - 2017.03.28 12:22
