Metal Stamping Part Suppliers – All series of metal stamping – RAISING-Elec
Metal Stamping Part Suppliers – All series of metal stamping – RAISING-Elec Detail:
Common appearance defect types of metal stamping parts:
Crack: the metal material breaks during stamping
Scratch: a strip-shaped shallow groove on the surface of hardware
Scratch: damage caused by contact and friction between material surfaces
Oxidation: the material changes chemically with the oxygen in the air
Deformation: appearance variation caused by material during stamping or transfer
Burr: surplus material is not completely left during punching or corner cutting
Convex Dent: abnormal bulge or depression on the material surface
Die mark: the mark left by the die on the material surface during stamping
Stain: oil stain or dirt attached to its surface during processing
● Wire-EDM : 6 Sets
● Brand: Seibu & Sodick
● Capability: Roughness Ra<0.12 / Tolerance +/-0.001mm
● Profile Grinder: 2 Sets
● Brand: WAIDA
● Capability: Roughness <0.05 / Tolerance +/-0.001
Product detail pictures:
Related Product Guide:
Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for our customers for Metal Stamping Part Suppliers – All series of metal stamping – RAISING-Elec , The product will supply to all over the world, such as: Bolivia, Jeddah, Orlando, Our products are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
By Candy from Boston - 2018.04.25 16:46
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
By Eleanore from Zurich - 2017.01.28 18:53