Metal Stamping Part Manufacturer – All series of metal stamping – RAISING-Elec
Metal Stamping Part Manufacturer – All series of metal stamping – RAISING-Elec Detail:
Common appearance defect types of metal stamping parts:
Crack: the metal material breaks during stamping
Scratch: a strip-shaped shallow groove on the surface of hardware
Scratch: damage caused by contact and friction between material surfaces
Oxidation: the material changes chemically with the oxygen in the air
Deformation: appearance variation caused by material during stamping or transfer
Burr: surplus material is not completely left during punching or corner cutting
Convex Dent: abnormal bulge or depression on the material surface
Die mark: the mark left by the die on the material surface during stamping
Stain: oil stain or dirt attached to its surface during processing
● Wire-EDM : 6 Sets
● Brand: Seibu & Sodick
● Capability: Roughness Ra<0.12 / Tolerance +/-0.001mm
● Profile Grinder: 2 Sets
● Brand: WAIDA
● Capability: Roughness <0.05 / Tolerance +/-0.001
Product detail pictures:
Related Product Guide:
Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Metal Stamping Part Manufacturer – All series of metal stamping – RAISING-Elec , The product will supply to all over the world, such as: Jordan, Serbia, Pakistan, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, You should contact with us now!
By Meredith from UK - 2017.01.28 19:59
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Gustave from Madras - 2018.11.06 10:04