Hardware Metal Stamping Part Manufacturers – All series of metal stamping – RAISING-Elec
Hardware Metal Stamping Part Manufacturers – All series of metal stamping – RAISING-Elec Detail:
Common appearance defect types of metal stamping parts:
Crack: the metal material breaks during stamping
Scratch: a strip-shaped shallow groove on the surface of hardware
Scratch: damage caused by contact and friction between material surfaces
Oxidation: the material changes chemically with the oxygen in the air
Deformation: appearance variation caused by material during stamping or transfer
Burr: surplus material is not completely left during punching or corner cutting
Convex Dent: abnormal bulge or depression on the material surface
Die mark: the mark left by the die on the material surface during stamping
Stain: oil stain or dirt attached to its surface during processing
● Wire-EDM : 6 Sets
● Brand: Seibu & Sodick
● Capability: Roughness Ra<0.12 / Tolerance +/-0.001mm
● Profile Grinder: 2 Sets
● Brand: WAIDA
● Capability: Roughness <0.05 / Tolerance +/-0.001
Product detail pictures:
Related Product Guide:
All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for Hardware Metal Stamping Part Manufacturers – All series of metal stamping – RAISING-Elec , The product will supply to all over the world, such as: Spain, Los Angeles, Ottawa, Our company's main products are widely used all over the world; 80% of our products exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.
By Mary from Luxembourg - 2018.09.29 13:24
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Jason from Czech - 2018.07.26 16:51