Deep Draw Metal Stamping Manufacturers – All series of metal stamping – RAISING-Elec
Deep Draw Metal Stamping Manufacturers – All series of metal stamping – RAISING-Elec Detail:
Common appearance defect types of metal stamping parts:
Crack: the metal material breaks during stamping
Scratch: a strip-shaped shallow groove on the surface of hardware
Scratch: damage caused by contact and friction between material surfaces
Oxidation: the material changes chemically with the oxygen in the air
Deformation: appearance variation caused by material during stamping or transfer
Burr: surplus material is not completely left during punching or corner cutting
Convex Dent: abnormal bulge or depression on the material surface
Die mark: the mark left by the die on the material surface during stamping
Stain: oil stain or dirt attached to its surface during processing
● Wire-EDM : 6 Sets
● Brand: Seibu & Sodick
● Capability: Roughness Ra<0.12 / Tolerance +/-0.001mm
● Profile Grinder: 2 Sets
● Brand: WAIDA
● Capability: Roughness <0.05 / Tolerance +/-0.001
Product detail pictures:
Related Product Guide:
Our progress depends around the innovative machines, great talents and consistently strengthened technology forces for Deep Draw Metal Stamping Manufacturers – All series of metal stamping – RAISING-Elec , The product will supply to all over the world, such as: Angola, Gambia, Vancouver, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to provide you the best service. If you need more information, please do not hesitate to contact us by E-mail or telephone.
By Emma from Latvia - 2018.12.10 19:03
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Roland Jacka from Lesotho - 2018.07.12 12:19