Stamping dies, also known as dies, metal dies, and metal stamping dies, have almost the same meaning. It refers to a pressure processing method that uses a die fixed on a punch or a press to apply a certain pressure to a metal or non-metallic sheet to separate or form the material, thereby obtaining parts with certain size requirements and qualified appearance quality.
The products processed through the mold are basically the same in size and appearance, and there is no big difference. Because of the rapid prototyping, high production efficiency, stable product quality, high precision, high material utilization, simple operation, and low labor intensity, the The technical requirements of the operators are not high. The average person only needs to come in and follow others to learn the operation for a day or two, and they will be able to get started very quickly. If you are the master of the production line, you must learn to operate the punch, feeder, leveler, mold removal, etc., which are all very simple tasks, as long as you are strong and willing to work hard.
Usually pay attention to safety and don’t put anything in the mold casually. Do not put wrenches, scissors, other tools, etc. in the mold. After a mold repairer has repaired the mold (technical term: mold repair), you need to do it before you hit it. Look good and see if they have forgotten anything in the mold. Of course, the general mold repairer will not make such a mistake, but you should also pay attention to it. Don’t break the mold or hurt your hands anywhere. Remember to pay attention to safety when doing this. If you forget to take out the contents of the mold, the punch may break the mold. If it flies out? People may also be injured.
Sometimes when the forklift forks the mold, the fork is not good, and the mold falls off. At this time, don’t hold it with your hands, let it go far away, and the mold is broken. Don’t smash people; Pay attention to keep away from the mold, be careful that the mold is shaken and touched, it will not be good.
Working in the mold industry or dealing with molds is often prone to accidents. Newcomers entering the factory should pay special attention to these safety matters.
Post time: Apr-28-2022